The Silcare Breathe Locking Liner combines the patented technology of the Silcare Breathe Cushion Liner, with the security of a locking system and unique one way valve on the liner, creating an airtight seal between the skin and the inner surface of the liner.

No separate suspension sleeve is required with Silcare Breathe Locking Liner, contributing to a cooler environment for skin and a more comfortable limb and socket connection.

Uni-directional stretch at the distal end resists pistoning whilst bi-directional stretch at the proximal end allows for comfortable knee flexion, whilst the Tendress^TM Finish means a lower coefficient of friction than standard silicone reduces shear stress on the skin.

Key Benefits

Laser Perforations

Optimally sized pores distributed uniformly along the length and distal end of the liner permit the escape of moisture.
Stretch Zones

Uni-directional stretch at the distal end resists pistoning whilst bi-directional stretch at the proximal end allows for comfortable knee flexion.
TendresseTM Finish

A lower coefficient of friction than standard silicone reduces shear stress on the skin.

Breathable Technology

The patented technology of Silcare Breathe works by letting the air and perspiration that are often trapped between the liner and skin to escape through specially designed laser drilled perforations.

The air and moisture are then expelled from the socket as the wearer walks, resulting in drier skin and a healthier environment for the residual limb. This helps to increase comfort and control, and reduce the damaging effects of relative motion on damp tissues that are often encountered with standard prosthetic liners.

Locking System

Locking system and unique one way valve create an airtight seal between the skin and the inner surface of the liner. No separate suspension sleeve is required with Silcare Breathe Locking liner contributing to a cooler environment for skin and a more comfortable limb and socket connection.

Silcare Breathe Technology

The body cools by moving blood flow closer to the surface of the skin, and when this is not sufficient the body produces sweat to increase cooling by evaporation.

The need to regulate body temperature is greater for amputees, and a lack of temperature regulation can have severe negative effects.

Benefits of breathable liner technology

The Silcare Breathe range has been designed to tackle these issues. Laser drilled perforations transmit moisture away from the skin to ensure a comfortable, cool and secure fit for the user.

Reduced relative movement between stump and liner
Enhanced proprioception
Enhanced comfort
Drier, cooler, healthier skin

^{1 Seymour,R. Prosthetics and Orthotics: Lower Limb and Spinal. Philadelphia: Lippincott, Williams and Wilkins 2002,}
^{2 Hagberg K, Brånemark R. Consequences of non-vascular trans-femoral amputation: a survey of quality of life, prosthetic use and problems. Prosthetics and Orthotics International. 2001; 25(3):186-94.}
^{3 Peery JT, Ledoux WR, Klute GK. Residual-limb skin temperature in transtibial sockets. Journal of Rehabilitation Research & Development. 2005; 42(2):147-54.}

Steve

“I literally called it the ‘Holy grail’ as it’s been a product that I had been waiting for since becoming an amputee 8 years ago!” “If you’re an active amputee that has struggled with the build-up of sweat in your liner, I would recommend this product.”
Charlie

“I normally have to stop several times to empty my liner and dry off my stump throughout the race.” “The Silcare Breathe Liner is a fantastic product, it’s great for taking the sweat away which adds to that confidence and security.”
Dennis

“It’s the best product out there, I can’t see anything out there that compares to the way it works.” “Due to the perforated holes in the liner, it draws moisture away from my limb while I’m walking and is much more comfortable without the skin breakdown”.
Adrian

“Silcare Breathe makes a huge difference – I can walk around without having to take my leg off to dry my limb.” “It’s much more secure, and feels much better. Using the Liner I don’t have to think so much about what I’m doing and I can just get on with enjoying the things that I love.”
Cassie

“The very first time I used Silcare I was really surprised how dry and secure I was in it. When I’m running I’m held in the socket and a lot more stable”

Clinical Evidence

Researchers at Blatchford in the US and UK have recently published a report evaluating the outcomes of three patients with residual limb skin problems, when they switched from their previous prescriptions to perforated Silcare Breathe liners.

All of the cases experienced a substantial reduction in sweating on their residual limb and their skin problems resolve – some in as little as three months. The improved environment within the prosthetic socket allowed them to wear their limbs unaffected by the issues that had previously caused them to restrict activities and prosthetic limb use.

View the paper “The influence of perforated prosthetic liners on residual limb wound healing: a case report”.

Support

Silcare Breathe Locking Liner Clinical Evidence Reference

Clinical Outcomes using Sweat Management liners

Residual Limb Health
- Improvements in residual limb health problems and wound healing^1,2
- Fewer residual skin issues²
- Reduction in pain in residual and phantom limb²
- Improved heat dissipation compared to other temperature regulation solutions³
- Removes sweat from skin interface^1,2,4
- Perforations do not damage the skin⁴
User satisfaction
- Patients reported a preference for their perforated liners^1,4
- Reduces the need to remove prosthesis throughout the day to dry residual limb⁴
Clinical Outcomes using Silicone liners
There are two published literature reviews that discuss different aspects of lower limb prosthetic liner technology^5,6.
- The main purpose of prosthetic liners is to cushion the transfer of loads from the prosthetic socket to the residual limb⁵.
- Based on load-displacement data from the compressive stiffness tests, silicone was one of three materials that were recommended for situations where it is desirable for the liner to maintain thickness and volume since these materials had the least non-recovered strain^5,7.
- Under cyclic compressive loading, silicone was one of two materials that had the greatest cycles to failure under compressive loading, while the Pedilin and polyurethane samples lasted orders of magnitude less^5,8.
- Prosthetic liners and sockets are highly resistive to heat conduction and could be a major contributor to elevated skin temperatures^5,9.
- There are reduced residual limb pressures with the silicone liner compared to other conditions (no liner; soft inserts) suggesting that silicone has an ability to distribute pressure evenly to the residual limb^4,10.
- In terms of patient outcomes, there was no clear preference between silicone and Pelite liners^5,11.

References

Full Reference Listing
1. McGrath M, McCarthy J, Gallego A, et al.
  
  The influence of perforated prosthetic liners on residual limb wound healing: a case report. Can Prosthet Orthot J 2019; 2(1).
2. Davies KC, McGrath M, Stenson A, Savage Z, Moser D, Zahedi S.
  
  Using perforated liners to combat the detrimental effects of excessive sweating in lower limb prosthesis users. Can Prosthet Orthot J. 2020;3(2).
3. Williams RJ, Washington ED, Miodownik M, et al.
  
  The effect of liner design and materials selection on prosthesis interface heat dissipation. Prosthet Orthot Int 2018; 42: 275–279.
4. Caldwell R, Fatone S.
  
  Technique for perforating a prosthetic liner to expel sweat. JPO J Prosthet Orthot 2017; 29: 145–147.
5. Klute GK, Glaister BC, Berge JS.
  
  Prosthetic liners for lower limb amputees: a review of the literature. Prosthet Orthot Int 2010; 34: 146–153.
6. Richardson A, Dillon MP.
  
  User experience of transtibial prosthetic liners: a systematic review. Prosthet Orthot Int 2017; 41: 6–18.
7. Sanders JE, Greve JM, Mitchell SB, et al.
  
  Material properties of commonly-used interface materials and their static coefficients of friction with skin and socks. J Rehabil Res Dev 1998; 35: 161–176.
8. Emrich R, Slater K.
  
  Comparative analysis of below-knee prosthetic socket liner materials. J Med Eng Technol 1998; 22: 94–98.
9. Klute GK, Rowe GI, Mamishev AV, et al.
  
  The thermal conductivity of prosthetic sockets and liners. Prosthet Orthot Int 2007; 31: 292–299.
10. Sonck WA, Cockrell JL, Koepke GH.
  
  Effect of liner materials on interface pressures in below-knee prostheses. Arch Phys Med Rehabil 1970; 51: 666.
11. Lee WC, Zhang M, Mak AF.
  
  Regional differences in pain threshold and tolerance of the transtibial residual limb: including the effects of age and interface material. Arch Phys Med Rehabil 2005; 86: 641–649.

Silcare Breathe Locking Liner Documentation

Product Information
- Silcare Breathe Locking Liner Brochure
  
  Download
Other downloads
- Silcare Breathe Locking Liner - 938413 Iss2 - Casting Dummy
  
  Download
- Silcare Breathe Locking Liner - Casting Guide
  
  Download
- Silcare Breathe Locking Liner - Silcare Liner Rectification Assistant
  
  Download
- Silcare Breathe Locking PDAC Verification Letter
  Suggested L-Codes: L5673
  
  Download
- Blatchford Product L Codes
  
  Download

The PDAC-Approved badge denotes a product that has been approved by the Pricing, Data Analysis and Coding (PDAC) contractor for one or more of the prior authorization codes as specified in the Healthcare Common Procedure Coding System (HCPCS) codes.

Products

Silcare Breathe Locking Liner

Key Benefits

Laser Perforations

Stretch Zones

TendresseTM Finish

Breathable Technology

Locking System

Silcare Breathe Technology

Steve

Charlie

Dennis

Adrian

Cassie